Skip to main content Skip to navigation
V500 Mouse IgG1, κ Isotype Control
V500 Mouse IgG1, κ Isotype Control

Profile of BD Horizon™ V500 Mouse IgG1, κ Isotype Control (X40) staining on human lysed whole blood and rat bone marrow. Human whole blood (left panel) or bone marrow cells from a Lew rat (right panel) were stained with BD Horizon™ V500 Mouse IgG1, к Isotype Control (solid line) or left unstained (dotted line). Flow Cytometry was performed on a BD FACSCanto™ II flow cytometry system.

Profile of BD Horizon™ V500 Mouse IgG1, κ Isotype Control (X40) staining on human lysed whole blood and rat bone marrow. Human whole blood (left panel) or bone marrow cells from a Lew rat (right panel) were stained with BD Horizon™ V500 Mouse IgG1, к Isotype Control (solid line) or left unstained (dotted line). Flow Cytometry was performed on a BD FACSCanto™ II flow cytometry system.

製品詳細
Down Arrow Up Arrow


BD Horizon™
Human, Rat (QC Testing)
Mouse BALB/c IgG1, κ
Keyhole limpet hemocyanin (KLH)
Flow cytometry, Isotype control (Routinely Tested)
0.2 mg/ml
3811
AB_1937319
Aqueous buffered solution containing protein stabilizer, glycerol and ≤0.09% sodium azide.
RUO


調製と保管

The monoclonal antibody was purified from tissue culture supernatant or ascites by affinity chromatography. The antibody was conjugated with BD Horizon™ V500 under optimum conditions, and unreacted BD Horizon™ V500 was removed. Store undiluted at 4°C and protected from prolonged exposure to light. Do not freeze.

製品通知

  1. Please refer to www.bdbiosciences.com/us/s/resources for technical protocols.
  2. An isotype control should be used at the same concentration as the antibody of interest.
  3. Since applications vary, each investigator should titrate the reagent to obtain optimal results.
  4. BD Horizon V500 has a maximum absorption of 415 nm and maximum emission of 500 nm. Before staining with this reagent, please confirm that your flow cytometer is capable of exciting the fluorochrome and discriminating the resulting fluorescence.
  5. Caution: Sodium azide yields highly toxic hydrazoic acid under acidic conditions. Dilute azide compounds in running water before discarding to avoid accumulation of potentially explosive deposits in plumbing.
  6. For fluorochrome spectra and suitable instrument settings, please refer to our Multicolor Flow Cytometry web page at www.bdbiosciences.com/colors.
560787 Rev. 1
抗体の詳細
Down Arrow Up Arrow
X40

The X40 hybridoma was derived from the fusion of mouse Sp2/0-Ag 14 myeloma cells with spleen cells from BALB/c mice immunized with keyhole limpet hemocyanin (KLH). The hybridoma secretes monoclonal antibody that binds specifically to KLH, an antigen not expressed on human cells or human cell lines.

The antibody is conjugated to BD Horizon™ V500, which has been developed for use in multicolor flow cytometry experiments and is

available exclusively from BD Biosciences. It is excited by the Violet laser with an Ex max of 415 nm and Em Max at 500 nm. BD Horizon V500 conjugates emit at a similar wavelength to Amcyan yet exhibit reduced spillover into the FITC channel. For more information on BD Horizon V500, visit bdbiosciences.com/colors.

When compensating dyes in this spectral range (such as Horizon™ V500 and AmCyan), the most accurate compensation can be obtained using single stained cellular controls.  Due to spectral differences between cells and beads  in this channel, using BD CompBeads can result in spillover errors for V500 and AmCyan reagents.   Therefore, the use of BD CompBeads or BD CompBeads Plus to determine spillover values for these reagents is not recommended.   Different V500 reagents (e.g. CD4 vs. CD45) can have slightly different fluorescence spillover therefore, it may also be necessary to use clone specific compensation controls when using these reagents.

560787 Rev. 1
フォーマットの詳細
Down Arrow Up Arrow
V500
BD Horizon™ V500 Dye is part of the BD Horizon™ Violet family of dyes. This is a small organic fluorochrome with an excitation maximum (Ex Max) at 415-nm and an emission maximum (Em Max) at 499-nm. Driven by BD innovation, V500 is designed to be excited by the violet laser (405-nm) and detected using an optical filter centered near 500 nm (eg, a 525/50 nm bandpass filter). Please ensure that your instrument’s configurations (lasers and optical filters) are appropriate for this dye.
altImg
V500
Violet 405 nm
415 nm
499 nm
560787 Rev.1

Please refer to Support Documents for Quality Certificates


Global - Refer to manufacturer's instructions for use and related User Manuals and Technical data sheets before using this products as described


Comparisons, where applicable, are made against older BD Technology, manual methods or are general performance claims.  Comparisons are not made against non-BD technologies, unless otherwise noted.

For Research Use Only. Not for use in diagnostic or therapeutic procedures.

23-22944-00