Skip to main content Skip to navigation
Human Naive CD4 T Cell Enrichment Set - DM

BD IMag™ Human Naive CD4 T Cell Enrichment Set - DM

(RUO)
Human Naive CD4 T Cell Enrichment Set - DM
Enrichment of naïve CD4+ T cells from human peripheral blood. PBMC were labeled with the BD IMag™ Human Naïve CD4+ T cell Enrichment Set - DM (Cat. No. 558521) and separated on the BD IMag™ Cell Separation Magnet (Cat. No. 552311) according to the accompanying protocol. In panels A and B, cells were stained with a cocktail consisting of PE Anti-Human CD8 (Cat. No. 555367), CD11b (Cat. No. 555388), CD16 (Cat. No. 555407), CD19 (Cat. No. 555413), CD36 (Cat. No. 555455), CD45RO (Cat. No. 555493), CD56 (Cat. No. 555516), CD123 (Cat. No. 555644), CD235a (Cat. No. 555570), and γδ TCR (Cat No. 555717) to detect non-naïve CD4+ cells, and an APC Human CD45RA (Cat. No. 550855) to detect naïve cells. For panels C and D, cells were stained with APC Mouse Anti-Human CD4 antibody (Cat. No. 555349) and FITC Mouse Anti-Human CD45RA antibody (Cat. No. 555488) to show the percentage of naïve CD4+ T cells. Dead cells were excluded by staining with 7-Amino-actinomycin D (7-AAD) (Cat. No. 559925). Refer to the Enrichment Flow Chart to identify the cell populations in this figure. The percentage of naïve CD4+ T cells is indicated in each panel. Panels A and C show unseparated PBMCs while panels B and D show the twice-enriched fraction after three 6-minute magnetic separations with an additional 3-10 minute separation. Flow cytometry was performed on a BD FACSCalibur™ flow cytometry system.
Enrichment of naïve CD4+ T cells from human peripheral blood. PBMC were labeled with the BD IMag™ Human Naïve CD4+ T cell Enrichment Set - DM (Cat. No. 558521) and separated on the BD IMag™ Cell Separation Magnet (Cat. No. 552311) according to the accompanying protocol. In panels A and B, cells were stained with a cocktail consisting of PE Anti-Human CD8 (Cat. No. 555367), CD11b (Cat. No. 555388), CD16 (Cat. No. 555407), CD19 (Cat. No. 555413), CD36 (Cat. No. 555455), CD45RO (Cat. No. 555493), CD56 (Cat. No. 555516), CD123 (Cat. No. 555644), CD235a (Cat. No. 555570), and γδ TCR (Cat No. 555717) to detect non-naïve CD4+ cells, and an APC Human CD45RA (Cat. No. 550855) to detect naïve cells. For panels C and D, cells were stained with APC Mouse Anti-Human CD4 antibody (Cat. No. 555349) and FITC Mouse Anti-Human CD45RA antibody (Cat. No. 555488) to show the percentage of naïve CD4+ T cells. Dead cells were excluded by staining with 7-Amino-actinomycin D (7-AAD) (Cat. No. 559925). Refer to the Enrichment Flow Chart to identify the cell populations in this figure. The percentage of naïve CD4+ T cells is indicated in each panel. Panels A and C show unseparated PBMCs while panels B and D show the twice-enriched fraction after three 6-minute magnetic separations with an additional 3-10 minute separation. Flow cytometry was performed on a BD FACSCalibur™ flow cytometry system.
製品詳細
Down Arrow Up Arrow


BD IMag™
Cell separation (Routinely Tested)
RUO
AB_2869213


説明

The BD IMag™ Human Naïve CD4+ T Cell Enrichment Set - DM is used for the negative selection of untouched naïve CD4+ T cells from peripheral blood. The Human Naïve CD4+ T Cell Enrichment Cocktail contains biotinylated monoclonal antibodies that recognize antigens expressed on memory T cells, CD8+ T cells, B cells, NK cells, γ/δ T cells, monocytes, DCs, granulocytes, platelets, and erythroid cells. The BD IMag™ Streptavidin Particles Plus - DM are magnetic nanoparticles that have streptavidin covalently conjugated to their surfaces. With these two components, this enrichment set avoids the inadvertent activation of the enriched naïve helper T cells by using reagents that do not directly bind to those T cells. This product has been optimized for use with the BD IMag™ Cell Separation Magnet (Cat. No. 552311), and contains sufficient reagents to label 1×10E9 peripheral blood mononuclear cells (PBMC).

The Human Naïve CD4+ T Cell Enrichment Cocktail comprises the following monoclonal antibodies:

Biotin Mouse Anti-human CD8, clone SK1

Biotin Mouse Anti-human CD11b, clone ICRF44

Biotin Mouse Anti-human CD16, clone 3G8

Biotin Mouse Anti-human CD19, clone HIB19

Biotin Mouse Anti-human CD36, clone CB38

Biotin Mouse Anti-human CD41a, clone HIP8

Biotin Mouse Anti-human CD45RO, clone UCHL1

Biotin Mouse Anti-human CD56, clone B159

Biotin Mouse Anti-human CD123, clone 9F5

Biotin Mouse Anti-human γδ-TCR, clone B1

Biotin Mouse Anti-human Glycophorin A, clone GA-R2

調製と保管

Store undiluted at 4°C. The monoclonal antibody was purified from tissue culture supernatant or ascites by affinity chromatography. The antibody was conjugated with biotin under optimum conditions, and unreacted biotin was removed. Antibody or streptavidin was conjugated to the magnetic particles under optimum conditions, and unconjugated antibody/streptavidin was removed.

推奨アッセイ手順

The detailed Magnetic Labeling and Enrichment Protocol follows. In summary, the Human Naïve CD4+ T Cell Enrichment Cocktail simultaneously stains erythrocytes, platelets, and most leukocytes except the naïve CD4+ helper T cells. After washing away excess antibody, BD IMag™ Streptavidin Particles Plus - DM are added to the cell suspension and bind the cells bearing the biotinylated antibodies. The tube containing this labeled cell suspension is then placed within the magnetic field of the BD IMag™ Cell Separation Magnet (Cat. No. 552311). Negative selection is then performed to enrich for the unlabeled naïve CD4+ T Cells. Labeled cells migrate toward the magnet (positive fraction), leaving the unlabeled cells in suspension so they can be drawn off and retained (enriched fraction). The negative selection is repeated twice to increase the yield of the enriched fraction. If greater purity is required, negative selection may be performed on the enriched fraction. For clarification of the procedure, the magnetic separation steps are diagrammed in the Enrichment Flow Chart. The positive and enriched fractions can be evaluated in downstream applications such as flow cytometry and tissue culture. The biotinylated antibodies in the Human Naïve CD4+ T Cell Enrichment Cocktail have been optimized and pre-diluted to provide maximum efficiency for the enrichment of naïve CD4+ T cells from PBMC.

MAGNETIC LABELING AND ENRICHMENT PROTOCOL

1. Prepare 1X BD IMag™ buffer: Dilute BD IMag™ Buffer (10X) (Cat. No. 552362) 1:10 with sterile distilled water or prepare Phosphate Buffered Saline (PBS) supplemented with 0.5% BSA, 2 mM EDTA, and 0.1% sodium azide.

2. Prepare PBMC from anti-coagulated human blood, preferably by density gradient centrifugation using Ficoll-Paque™.*

3. Count the cells, and resuspend them in 1X BD IMag™ buffer at a concentration of 50×10E6  cells/ml.

4. Add the Human Naïve CD4+ T Cell Enrichment Cocktail at 5 μl per 1×10E6  cells, and incubate at room temperature for 15 minutes.†

5. Wash the labeled cells with a 10X excess volume of 1X BD IMag™ buffer, centrifuge at 300 × g for 10 minutes, and carefully aspirate ALL the supernatant.

6. Vortex the BD IMag™ Streptavidin Particles Plus - DM thoroughly, and resuspend the cell pellet in 7.5 μl of particles per 1×10E6  cells.

Please note that this volume of IMag Streptavidin Particles is higher than that used in most BD IMag enrichment sets and that this Set contains a greater total volume of these particles to account for this difference.

7. MIX THOROUGHLY. Incubate at room temperature for 30 minutes.†

8. Bring the labeling volume up to a concentration of 10 to 80×10E6  cells/ml with 1X BD IMag™ buffer.

9. Transfer the labeled cells to a 12×75 mm round-bottom test tube, maximum volume added not to exceed 1.0 ml. Place this positive-fraction tube on the BD IMag™ Cell Separation Magnet (horizontal position) for 6 to 8 minutes.

• For greater volume, divide the cells into multiple 12×75 mm round-bottom test tubes or transfer the cells to a 17×100 mm round-bottom test tube, maximum volume added not to exceed 3.0 ml. Place this positive-fraction tube on the BD IMag™ Cell Separation Magnet (vertical position) for 8 minutes.

10. With the tube on the BD IMag™ Cell Separation Magnet and using a sterile glass Pasteur pipette, carefully aspirate the supernatant (enriched fraction) and place in a new sterile tube.

11. Remove the positive-fraction tube from the BD IMag™ Cell Separation Magnet, and add 1X BD IMag™ buffer to the same volume as in Step 8. Resuspend the positive fraction well by pipetting up and down 10 to 15 times (avoid creating bubbles), and place the tube back on the BD IMag™ Cell Separation Magnet for 6 to 8 minutes.

• For 17×100 mm tube: Place on the BD IMag™ Cell Separation Magnet for 8 minutes.

12. Using a new sterile Pasteur pipette, carefully aspirate the supernatant and combine with the enriched fraction from Step 10 above.

13. Repeat Steps 11 and 12. The combined enriched fraction contains naïve CD4+ cells with no bound antibodies or magnetic particles.

14. To increase the purity of the combined enriched fraction, place the tube containing the combined enriched fraction on the BD IMag™ Cell Separation Magnet for another 3-10 minutes. Increased magnet time will increase purity but lower recovery.

• For 17×100 mm tube: Place on the BD IMag™ Cell Separation Magnet for 6 minutes.

15. Carefully aspirate the supernatant and place in a new sterile tube. This is the twice-enriched naïve CD4+ fraction. The cells are ready to be processed for downstream applications.

16. The positive-fraction cells remaining in the original tube can be resuspended in an appropriate buffer or culture medium for downstream applications, including flow cytometry, if desired.

17. Samples of the total cell suspension, the positive and enriched fractions should be analyzed by flow cytometry to evaluate the efficiency of the cell-separation procedure.

NOTES:

* Hints for successful cell preparation:

• Draw the blood into a tube containing EDTA

• Remove the platelet rich plasma by centrifuging once at 220-240 × g.

• Wash 2-3 times in PBS after the density gradient separation.

• After the final wash, resuspend the cells at a relatively high concentration in 1X BD IMag™ buffer and proceed to step 3.

† Avoid nonspecific labeling by working quickly and adhering to recommended incubation times.

製品通知

  1. Caution: Sodium azide yields highly toxic hydrazoic acid under acidic conditions. Dilute azide compounds in running water before discarding to avoid accumulation of potentially explosive deposits in plumbing.
  2. Source of all serum proteins is from USDA inspected abattoirs located in the United States.
  3. Ficoll-Paque is a trademark of Amersham Biosciences Limited.
  4. BD IMag™ particles are prepared from carboxy-functionalized magnetic particles which are manufactured by Skold Technology and are licensed under US patent number 7,169,618.
  5. Please refer to http://regdocs.bd.com to access safety data sheets (SDS).
  6. Please refer to www.bdbiosciences.com/us/s/resources for technical protocols.
558521 Rev. 3
構成品
Down Arrow Up Arrow
説明 EntrezGene ID
Human Naive CD4 T Cell Enrichment Cocktail N/A
Streptavidin Particles Plus – DM N/A
558521 Rev. 3

Please refer to Support Documents for Quality Certificates

Global - Refer to manufacturer's instructions for use and related User Manuals and Technical data sheets before using this products as described

Comparisons, where applicable, are made against older BD Technology, manual methods or are general performance claims.  Comparisons are not made against non-BD technologies, unless otherwise noted.

For Research Use Only. Not for use in diagnostic or therapeutic procedures.