Skip to main content Skip to navigation
Alexa Fluor® 488 Mouse anti-GM130
Alexa Fluor® 488 Mouse anti-GM130
Immunofluorescent staining of human cell lines. HeLa cells (ATCC CCL-2) were cultured, fixed, permeabilized with Triton™ X-100, stained with Alexa Fluor® 488 Mouse anti-GM130 (pseudo colored green), and counter stained with Hoechst 33342 (pseudo colored blue) according to the Recommended Assay Procedure.  The images were captured on a BD Pathway™ 435 Cell Analyzer with a 20x objective and merged using BD AttoVision™ software.  This antibody also stains A549 (ATCC CCL-185) and U-2 OS (ATCC HTB-96) cells, and it also worked with the Saponin and cold methanol fix/perm protocols (see Recommended Assay Procedure).
Immunofluorescent staining of human cell lines. HeLa cells (ATCC CCL-2) were cultured, fixed, permeabilized with Triton™ X-100, stained with Alexa Fluor® 488 Mouse anti-GM130 (pseudo colored green), and counter stained with Hoechst 33342 (pseudo colored blue) according to the Recommended Assay Procedure.  The images were captured on a BD Pathway™ 435 Cell Analyzer with a 20x objective and merged using BD AttoVision™ software.  This antibody also stains A549 (ATCC CCL-185) and U-2 OS (ATCC HTB-96) cells, and it also worked with the Saponin and cold methanol fix/perm protocols (see Recommended Assay Procedure).
商品详情
Down Arrow Up Arrow


BD Pharmingen™
Golgi autoantigen, Golgin 95, Golgin subfamily A member 2
Human (QC Testing), Mouse, Rat, Dog (Reactivity Confirmed in Development)
Mouse IgG1, κ
Rat GM130 aa. 869-982
Bioimaging (Routinely Tested)
5 µl
AB_1645351
Aqueous buffered solution containing BSA, protein stabilizer, and ≤0.09% sodium azide.
RUO


准备和存储

The monoclonal antibody was purified from tissue culture supernatant or ascites by affinity chromatography. The antibody was conjugated to Alexa Fluor® 488 under optimum conditions, and unreacted Alexa Fluor® 488 was removed. Store undiluted at 4°C and protected from prolonged exposure to light. Do not freeze.

推荐的实验流程

1.        Seed the cells in appropriate culture medium at an appropriate cell density in a BD Falcon™ 96-well Imaging Plate (Cat. No. 353219), and

        culture overnight to 48 hours.

2.        Remove the culture medium from the wells, and wash (one to two times) with 100 µl of 1× PBS.

3.        Fix the cells by adding 100 µl of fresh 3.7% Formaldehyde in PBS or BD Cytofix™ fixation buffer (Cat. No. 554655) to each well and

        incubating for 10 minutes at room temperature (RT).

4.        Remove the fixative from the wells, and wash the wells (one to two times) with 100 µl of 1× PBS.

5.        Permeabilize the cells using either cold methanol (a), Triton™ X-100 (b), or Saponin (c):

                a.        Add 100 µl of -20°C 90% methanol or -20°C BD™ Phosflow Perm Buffer III (Cat. No. 558050) to each well and incubate for 5

                        minutes at RT.

                b.        Add 100 µl of 0.1% Triton™ X-100 to each well and incubate for 5 minutes at RT.

                c.        Add 100 µl of 1× Perm/Wash buffer (Cat. No. 554723) to each well and incubate for 15 to 30 minutes at RT.  Continue to use 1×

                        Perm/Wash buffer for all subsequent wash and dilutions steps.

6.        Remove the permeabilization buffer from the wells, and wash one to two times with 100 µl of appropriate buffer (either 1× PBS or 1×

        Perm/Wash buffer, see step 5.c.).

7.        Optional blocking step:  Remove the wash buffers, and block the cells by adding 100 µl of blocking buffer BD Pharmingen™ Stain Buffer

        (FBS) (Cat. No. 554656) or 3% FBS in appropriate dilution buffer to each well and incubating for 15 to 30 minutes at RT.

8.        Dilute the antibody to its optimal working concentration in appropriate dilution buffer.  Titrate purified (unconjugated) antibodies and

        second-step reagents to determine the optimal concentration.  If using a Bioimaging Certified antibody conjugate, dilute it 1:10.

9.        Add 50 µl of diluted antibody per well and incubate for 60 minutes at RT.  Incubate in the dark if using fluorescently labeled antibodies.

10.        Remove the antibody, and wash the wells three times with 100 µl of wash buffer.  An optional detergent wash (100 µl of 0.05% Tween in 1×

        PBS) can be included prior to the regular wash steps.

11.   If the antibody being used is fluorescently labeled, then move to step 12.  Otherwise, if using a purified unlabeled antibody, repeat steps 8 to

        10 with a fluorescently labeled second-step reagent to detect the purified antibody.

12.        After the final wash, counter-stain the nuclei by adding 100 µl of a 2 µg/ml solution of Hoechst 33342 (eg, Sigma-Aldrich Cat. No. B2261)

        in 1× PBS to each well at least 15 minutes before imaging.

13.        View and analyze the cells on an appropriate imaging instrument. Recommended filters for the BD Pathway™ instruments are:

Instrument                        Excitation        Emission        Dichroic

BD Pathway 855                488/10                515 LP                Fura/FITC

BD Pathway 435                482/35                536/40                FF506

商品通知

  1. This reagent has been pre-diluted for use at the recommended Volume per Test when following the Recommended Assay Procedure. A Test is typically ~10,000 cells cultured in a well of a 96-well imaging plate.
  2. Please refer to www.bdbiosciences.com/us/s/resources for technical protocols.
  3. The Alexa Fluor®, Pacific Blue™, and Cascade Blue® dye antibody conjugates in this product are sold under license from Molecular Probes, Inc. for research use only, excluding use in combination with microarrays, or as analyte specific reagents. The Alexa Fluor® dyes (except for Alexa Fluor® 430), Pacific Blue™ dye, and Cascade Blue® dye are covered by pending and issued patents.
  4. Caution: Sodium azide yields highly toxic hydrazoic acid under acidic conditions. Dilute azide compounds in running water before discarding to avoid accumulation of potentially explosive deposits in plumbing.
  5. Source of all serum proteins is from USDA inspected abattoirs located in the United States.
  6. Triton is a trademark of the Dow Chemical Company.
  7. Alexa Fluor® is a registered trademark of Molecular Probes, Inc., Eugene, OR.
560257 Rev. 1
抗体详情
Down Arrow Up Arrow
35/GM130

Maturation and post-translational modification of proteins occurs after their biosynthesis at the endoplasmic reticulum and their transport through the Golgi apparatus. The process involves the transport of vesicles carrying the proteins through a vectorial process of vesicle budding and fusion from the cis-compartment to the medial-compartment and the trans-compartment of the Golgi apparatus. The detergent insoluble fraction of the Golgi is named "matrix" and is required for proper morphology of the Golgi membranes. GM130 (Golgi matrix protein of 130 kDa) is a protein isolated from the Triton™ X-100-insoluble Golgi matrix and peripherally associated with the cis-compartment, as demonstrated by co-localization with syntaxin5. GM130 is homologous to the Golgi autoantigen golgin 95. GM130 interacts through its N-terminal domain with p115 and with the Golgi membranes at the C-terminal portion. Furthermore, the mitotic phosphorylation of GM130 blocks the interaction with p115. Thus, GM130 appears to function as a structural element of the Golgi apparatus that also provides attachment sites for membranes and other Golgi proteins.  The 35/GM130 monoclonal antibody recognizes GM130, regardless of phosphorylation status.

560257 Rev. 1
格式详情
Down Arrow Up Arrow
Alexa Fluor™ 488
Alexa Fluor™ 488 Dye is part of the BD blue family of dyes. This is a small organic fluorochrome with an excitation maximum (Ex Max) at 494-nm and an emission maximum (Em Max) at 517-nm. Alexa Fluor™ 488 is designed to be excited by the Blue laser (488 nm) and detected using an optical filter centered near 520-nm (e.g., a 530/30-nm bandpass filter). Please ensure that your instrument’s configurations (lasers and optical filters) are appropriate for this dye.
Alexa Fluor™ 488
Blue 488 nm
494 nm
517 nm
560257 Rev.1
报价单和参考
Down Arrow Up Arrow

研发参考 (5)

  1. Barr FA, Short B. Golgins in the structure and dynamics of the Golgi apparatus. Curr Opin Cell Biol. 2003; 15(4):405-413. (Biology). 查看参考
  2. Gilbert J, Benjamin T. Uptake pathway of polyomavirus via ganglioside GD1a. J Virol. 2004; 78(22):12259-12267. (Clone-specific: Immunofluorescence). 查看参考
  3. Nakamura N, Tanaka S, Teko Y, Mitsui K, Kanazawa H. Four Na+/H+ exchanger isoforms are distributed to Golgi and post-Golgi compartments and are involved in organelle pH regulation. J Biol Chem. 2005; 280(2):1561-1572. (Clone-specific: Immunofluorescence). 查看参考
  4. Shin H-W, Kobayashi H, Kitamura M, et al. Roles of ARFRP1 (ADP-ribosylation factor-related protein 1) in post-Golgi membrane trafficking. J Cell Sci. 2005; 118:4039-4048. (Clone-specific: Immunofluorescence). 查看参考
  5. Takatsu H, Yoshino K, Toda K, Nakayama K. GGA proteins associate with Golgi membranes through interaction between their GGAH domains and ADP-ribosylation factors. Biochem J. 2002; 365:369-378. (Clone-specific: Immunofluorescence). 查看参考
查看所有文件 (5) 查看更少内容
560257 Rev. 1

Please refer to Support Documents for Quality Certificates


Global - Refer to manufacturer's instructions for use and related User Manuals and Technical data sheets before using this products as described


Comparisons, where applicable, are made against older BD Technology, manual methods or are general performance claims.  Comparisons are not made against non-BD technologies, unless otherwise noted.

For Research Use Only. Not for use in diagnostic or therapeutic procedures.