Skip to main content Skip to navigation

Flow Cytometry Buffers

Staining, Fixation, Permeabilization and Wash Reagents


Flow cytometry buffers create the right environment for your samples, supporting every step of a flow cytometry experiment, including staining, fixation, and permeabilization. Buffer choice matters—using the wrong buffer can result in high background, low staining intensity, or compromised cell integrity and morphology. Our wide portfolio of flow cytometry buffers is validated and compatible with our antibodies, dyes, and instruments to support your surface staining, intracellular staining, and fixation research protocols.

Staining Reagents

  • Blocking buffers for reducing non-specific interactions
    Blocking reagents may be used in flow cytometry staining workflows to reduce non-specific antibody interactions. Pre-incubating samples with BD Pharmingen™ Human BD Fc Block™ before antibody staining reduces non-specific antibody binding, particularly to monocytes and other Fc receptor-expressing cells. When using cyanine tandem dye-conjugated antibodies (e.g., PE-Cy5, PE-Cy7, APC-Cy7), adding BD Pharmingen™ MonoBlock™ Leukocyte Staining Buffer reduces further dye-mediated nonspecific binding to monocytes or other leukocytes.

  • Blocking buffers for reducing dye-dye interactions
    For panels containing two or more BD Horizon Brilliant™ Dyes (BV, BB or BUV fluorochromes), BD Horizon™ Brilliant Stain Buffer or Brilliant Stain Buffer Plus must be added to the antibody cocktail to reduce dye-dye interactions and staining artifacts that can affect population resolution. 

  • Washing and pre-sorting buffers
    During staining and washing steps, suspending cells in BD Pharmingen™ Stain Buffer (FBS) or BD Pharmingen™ Stain Buffer (BSA) maintains cell viability and minimizes background staining. For cell sorting applications, BD FACS™ Pre-Sort Buffer helps maintain cell viability, reduce cell aggregation, and preserve sample integrity during sorting, thereby improving sort efficiency and recovery.

  • Viability stain reagents
    When using Annexin V to detect apoptotic cells, use the BD Pharmingen™ Annexin V Binding Buffer to provide the calcium required for Annexin V binding. To distinguish apoptotic from dead cells, Annexin V staining can be combined with non-fixable viability dyes such as BD Pharmingen™ Propidium Iodide Staining Solution or BD Pharmingen™ 7-AAD. When samples are to be fixed after staining, Fixable Viability Dyes (FVS) are recommended. Both Annexin V and fixable viability stains are available in multiple fluorochrome formats, allowing flexibility in panel design.

 

 

ReagentResearch Purpose

BD Pharmingen™ Human BD Fc Block™

Blocks Fc receptor-mediated non-specific antibody binding during cell staining.

BD Pharmingen™ MonoBlock™ Leukocyte Staining Buffer

Reduces nonspecific binding of cyanine tandem dye conjugates (e.g., PE-Cy5, PE-Cy7, APC-Cy7) to monocytes and other leukocytes, improving staining specificity.

BD Horizon™ Brilliant Stain Buffer Plus

BD Horizon™ Brilliant Stain Buffer

Minimizes dye-dye interactions and staining artifacts when using multiple BD Horizon Brilliant™ Dyes.

 

BD Pharmingen™ Stain Buffer (FBS)

Staining, washing and cell suspension buffer containing fetal bovine serum (FBS).

BD Pharmingen™ Stain Buffer (BSA)

Bovine Serum Albumin (BSA)-based staining, washing and cell suspension buffer.

BD FACS™ Pre-Sort Buffer

Sterile, buffered saline with FBS-based protein, low Ca²⁺/Mg²⁺, no EDTA for preparing, maintaining and suspending cells.

BD Pharmingen™ Annexin V Binding Buffer, 10X concentrate

Calcium-containing buffer required for Annexin V apoptosis assays, enabling Annexin V binding to phosphatidylserine on apoptotic cells.

BD Pharmingen™ Propidium Iodide Staining Solution

Membrane impermeant nucleic acid dye for DNA content analysis and viability assessment

BD Pharmingen™ 7-AAD

Membrane impermeant nucleic acid dye for viability assessment

Fixable Viability Stains (FVS)

Amine-reactive dyes for live/dead cells discrimination in fixed or permeabilized cells

 

Red Blood Cell Lysis Reagents

RBC lysis enriches leukocytes by eliminating the large excess of erythrocytes present in whole blood, thereby reducing sample complexity and improving the accuracy, sensitivity, and efficiency of downstream flow cytometric analyses. The right lysis buffer depends on the workflow, intended application, and any subsequent fixation or intracellular staining requirements.
 

1. Stain → Lyse → Wash

When staining samples before RBC lysis, use BD FACS™ Lysing Solution to promote efficient erythrocyte lysis with concurrent leukocyte fixation, enhancing sample stabilization and assay standardization.
 

2.  Stain → Lyse → No Wash

Eliminating wash steps after RBC lysis maximizes cell recovery while enabling detection of rare cell populations. After antibody staining, RBCs are lysed and samples are acquired directly without additional wash steps. BD FACS™ Lysing Solution is specially formulated to support this workflow. 

Red Blood Cell Lysis Reagents

3. Lyse → Wash → Stain

When lysing red blood cells before staining, using BD Pharm Lyse™ Lysing Buffer selectively eliminates erythrocytes while preserving leukocyte viability and the integrity of surface markers. This lysing buffer is therefore critical when downstream analyses of live cells are required, including cell sorting, functional assays, and cell culture. In addition, this workflow can be integrated with post-staining fixation protocols. 



Reagent

Research Purpose

BD FACS™ Lysing Solution 10X Concentrate

Formaldehyde-containing lysing reagent for whole blood immunophenotyping. Suitable for both lyse/wash and lyse/no-wash workflows.

BD Pharm Lyse™ Lysing Buffer

Ammonium chloride-based lysing buffer that removes red blood cells while maintaining viable leukocytes. Commonly used in pre-staining bulk lysis workflows.

 

Cell Fixation and Permeabilization Reagents

  • Cell preservation
    For workflows that require sample preservation, delayed acquisition, intracellular staining, or enhanced biosafety handling, cells may be fixed following staining. Fixation with BD Cytofix™ Fixation Buffer crosslinks cellular proteins and stabilizes cellular structure, preserving target molecules while maintaining cell morphology and enabling short- to long-term storage of stained samples at 4 °C. This workflow is particularly useful when samples cannot be acquired immediately after staining or when centralized acquisition of samples prepared at different sites is required.

    Because fixation can alter epitope conformation, BD Cytofix™ Fixation Buffer may affect the performance of certain antibody clones, potentially resulting in reduced or altered antigen recognition when cells are fixed prior to staining.

  • Intracellular staining
    In addition to sample preservation, fixation serves as the first critical step for intracellular staining workflows by stabilizing cellular components prior to membrane permeabilization.

    Following fixation, cells can be treated with a variety of permeabilization buffers depending on the intracellular target's localization, biochemical properties, and stability. For the detection of cytosolic proteins, including cytokines and chemokines, the BD Perm/Wash™ Buffer, BD Phosflow™ Perm/Wash Buffer I or BD Cytofix/Cytoperm™ Fixation/Permeabilization Kit provide gentle saponin-based permeabilization that preserves cellular morphology while allowing antibody access to intracellular compartments.
Cell fixation and permeabilization reagents
Intracellular cytokine and granzyme analysis of activated BCMA-CAR T cells. BCMA-CAR T cells were stimulated with U266 cells for four hours in the presence of BD GolgiStop™ Protein Transport Inhibitor (Containing Monensin) and BD GolgiPlug™ Protein Transport Inhibitor (Containing Brefeldin A), followed by surface staining, fixation, permeabilization and intracellular staining for IFN-γ and Granzyme B. Data were acquired on a BD FACSDiscover™ S8 Cell Sorter with CellView™ Imaging Technology.

 

 

For nuclear proteins and transcription factors, the BD Pharmingen™ Transcription Factor Buffer Set is recommended, as it is specifically optimized for fixation and permeabilization of both cell and nuclear membranes.


For phosphorylated signaling proteins (phosphoproteins), harsher permeabilization is required to preserve phosphorylation states and provide access to signaling molecules. BD Phosflow™ Perm Buffer III is a methanol-based permeabilization reagent that provides excellent access to intracellular phosphoproteins. Alternatively, fixed cells can be permeabilized with BD Phosflow™ Perm Buffer II. Selection of the optimal reagent is target-dependent and should be determined experimentally during assay development.


Perm II and Perm III create harsh permeabilization conditions that can affect the integrity of certain cell surface epitopes, altering antibody binding or the performance of specific fluorochromes, particularly tandem dyes. Surface marker staining is therefore often performed prior to fixation and permeabilization, and all antibody-fluorochrome combinations should be validated under the intended Phosflow workflow conditions for optimal performance.


When simultaneous analysis of transcription factors and phosphorylated signaling proteins is required, the BD Pharmingen™ Transcription Factor Phospho Buffer Set provides a specialized fixation and permeabilization workflow optimized for concurrent detection of cell surface markers, nuclear transcription factors and phosphoproteins in the same sample.

 

For detecting phosphoproteins in whole blood, BD Phosflow™ Lyse/Fix Buffer provides simultaneous red blood cell lysis and fixation, enabling rapid stabilization of phosphorylation-dependent signaling events and improved detection of phosphoproteins in these samples. In addition, BD Phosflow™ Lyse/Fix Buffer can improve resolution of certain non-phosphoprotein targets by reducing background staining for specific antibody clones that may perform suboptimally in other fixation and permeabilization workflows. Following cell fixation with BD Phosflow™ Lyse/Fix Buffer, methanol-based permeabilization buffers are the preferred choices for phosphoproteins. Non-phosphorylated intracellular targets can be detected with saponin-based buffers.

Protocol Overview

Overview of Buffer Dilution, Cell Preparation and Staining Protocol

 

Reagent

Research Purpose

BD Cytofix™ Fixation Buffer

General cell fixation, sample preservation, delayed acquisition, intracellular staining workflows

BD Perm/Wash™ Buffer

Permeabilization and washing steps for detection of cytosolic targets

BD Phosflow™ Perm/Wash Buffer I

Permeabilization and washing steps for detection of cytosolic targets

BD Cytofix/Cytoperm™ Fixation/Permeabilization Kit

Optimized for simultaneous detection of surface and cytosolic targets, especially cytokines and chemokines

BD Pharmingen™ Transcription Factor Buffer Set

Simultaneous detection of cell surface markers and transcription factors

BD Phosflow™ Perm Buffer III

Methanol-based permeabilization buffer optimized for phosphoprotein analysis

BD Phosflow™ Perm Buffer II

Methanol-based permeabilization buffer optimized for selected phosphoprotein targets

BD Pharmingen™ Transcription Factor Phospho Buffer Set

Simultaneous detection of cell surface markers, transcription factors, and phosphoproteins

BD Phosflow™ Lyse/Fix Buffer 5X

Simultaneous RBC lysis and fixation for phosphoprotein studies; may improve resolution of some non-phosphoprotein targets

Correct Reagents and Workflows

Choosing the Correct Reagents and Workflows for Your Targets

If your target is...

Recommended workflow

Cell surface markers only

Stain Buffer ± Fc Block ± Monoblock ± Brilliant Stain Buffer

Cytokines, chemokines, granzymes and other cytoplasmic proteins

Whole blood: Phosflow Lyse/Fix + Perm/Wash or Perm I
Other sample types: Cytofix/Cytoperm Kit or Cytofix + Perm/Wash or Perm I

Transcription factors and nuclear proteins

Transcription Factor Buffer Set

Phosphorylated signaling proteins

Whole blood: Phosflow Lyse/Fix + Perm II or Perm III
Other sample types: Cytofix + Perm II or Perm III

Transcription factors + phosphoproteins

TF Phospho Buffer Set

± Optional but highly recommended for optimal multicolor staining workflows.


Running a multi-step protocol? Buffer selection can affect antibody performance, fluorochrome stability and processing time. Ensure all buffers are compatible with each step of your workflow, from cell staining through fixation and permeabilization.

FAQs

  1. What buffer should I use for flow cytometry staining?
    BD Pharmingen™ Stain Buffer (FBS) is recommended for standard surface staining. If you use two or more BD Horizon Brilliant™ Dyes, add BD Horizon™ Brilliant Stain Buffer to the antibody cocktail to prevent artifacts. For intracellular staining workflows, follow BD recommendations for the specific fixation and permeabilization buffer sets.

  2. Do I need to use Brilliant Stain Buffer if I am using BD Brilliant dyes?
    Yes. Whenever two or more BD Horizon Brilliant™ Dyes are present in a sample at the same time, always use BD Horizon™ Brilliant Stain Buffer (BSB). Otherwise, non-specific polymer interactions will result in background staining. Adding BSB to the surface-staining cocktail will maintain optimal fluorescence performance even after wash steps and secondary staining with BD Horizon Brilliant™ Dyes. For whole blood assays, BSB may additionally help mitigate anti-PEG interactions. BD Horizon™ Brilliant Stain Buffer Plus is a concentrated version of the standard BSB, ideal for volume-constrained workflows.

  3. What is the difference between BD Cytofix™ and BD Cytofix/Cytoperm™?
    BD Cytofix™ Fixation Buffer is used for cell fixation, while BD Cytofix/Cytoperm™ is the fixation/permeabilization reagent included in the BD Cytofix/Cytoperm™ Fixation/Permeabilization Kit, enabling both cell fixation and membrane permeabilization in a single step. BD Cytofix/Cytoperm™ streamlines the workflow but permeabilization with this reagent is a reversible process, so cells should proceed immediately to intracellular staining using BD Perm/Wash™ or Perm I buffers to maintain permeabilization throughout staining and washing procedures.

  4. Which fixation and permeabilization buffer should I use for transcription factors and nuclear targets?
    Use the BD Pharmingen™ Transcription Factor Buffer Set. It is specifically formulated for nuclear transcription factor staining, using a permeabilization strategy that allows antibodies to access the nucleus.

  5. Can I use a lysis buffer with my staining protocol?
    Yes, use BD FACS™ Lysing Solution or BD Pharm Lyse™ Lysis Buffer. FACS Lysing Solution has a formaldehyde-based composition that promotes leukocyte fixation, enhancing data consistency, and facilitating sample handling. BD Pharm Lyse™ Lysis Buffer is fixative-free, making it ideal for bulk RBC lysis and when viable leukocytes are required for downstream applications.

  6. Can I store cells after staining?
    To store cells for prolonged periods of time, they must be initially fixed with BD Cytofix™. Existing protocols support storage in Perm II or Perm III after fixation, although storage duration and temperature can affect epitope preservation and fluorochrome stability. We recommend validating storage conditions for specific targets and fluorochromes used in the staining process.     

Related Products

BD Horizon Brilliant™ Dyes: This dye family provides a broad range of excitation and emission wavelengths, but make sure to use BD Horizon™ Brilliant Stain Buffer when using two or more of these dyes in a single panel.

 

Viability Dyes (DNA-binding and amine-reactive fixable viability dyes) 
Use these dyes to determine live from dead cells. These dyes are compatible with fixation and permeabilization workflows but must be added prior to fixation. Staining can be performed alongside antibody cocktails, and proper titration is recommended to achieve optimal performance in the intended workflow.

BD Pharmingen™ Fc Block™: Use at the beginning of the staining protocol, before primary antibody addition, to reduce non-specific binding of antibodies to Fc receptor-expressing cells.

BD Pharmingen™ MonoBlock™ Leukocyte Staining Buffer
Use to block nonspecific binding between leukocytes and cyanine-containing and cyanine-like tandem fluorochromes when working with mouse or human cells.

Compensation Beads
Our BD™ SpectraComp™ and BD™ CompBeads Beads are used as compensation controls and should be treated with the same buffer as your experimental panel (including BD Horizon™ Brilliant Stain Buffer if needed).

BD® OMICS-Guard
A sample preservation buffer that stabilizes both RNA and protein markers in cells and tissues for up to 72 hours at 4°C, enabling flexible sample handling and transport while maintaining compatibility with flow cytometry and single-cell multiomics workflows.

BD FACSFlow™ Sheath Fluid
An azide-free, ready-to-use buffer optimized for BD flow cytometers. It maintains stable fluidics performance, supports accurate cell alignment, and contributes to high signal-to-noise ratios during data acquisition. 

   

   

For Research Use Only. Not for use in diagnostic or therapeutic procedures.