Skip to main content Skip to navigation
Alexa Fluor® 647 Mouse Anti-Nestin
Alexa Fluor® 647 Mouse Anti-Nestin
Immunofluorescent staining of rat and human cells, respectively. C6 glioma cells (ATCC Cat. No. CCL-107, left image) and neural stem cells derived from H9 embryonic stem cells (WiCell, Madison, WI, right image) were cultured in a 96-well imaging plate (Cat. No. 353219). Cells were fixed, permeabilized with cold methanol, and stained with Alexa Fluor® 647 Mouse anti-Nestin (pseudo colored magenta) according to the Recommended Assay Procedure. Cell nuclei were counterstained with Hoechst 33342 (pseudo colored blue). The images were captured on a BD Pathway™ 435 High-Content Bioimager System using a 20X objective and merged using BD AttoVision™ software. The staining also worked with the Saponin and the Triton™ X-100 Perm/Wash protocols (see Recommended Assay Procedure; Bioimaging protocol link).
Immunofluorescent staining of rat and human cells, respectively. C6 glioma cells (ATCC Cat. No. CCL-107, left image) and neural stem cells derived from H9 embryonic stem cells (WiCell, Madison, WI, right image) were cultured in a 96-well imaging plate (Cat. No. 353219). Cells were fixed, permeabilized with cold methanol, and stained with Alexa Fluor® 647 Mouse anti-Nestin (pseudo colored magenta) according to the Recommended Assay Procedure. Cell nuclei were counterstained with Hoechst 33342 (pseudo colored blue). The images were captured on a BD Pathway™ 435 High-Content Bioimager System using a 20X objective and merged using BD AttoVision™ software. The staining also worked with the Saponin and the Triton™ X-100 Perm/Wash protocols (see Recommended Assay Procedure; Bioimaging protocol link).
Product Details
Down Arrow Up Arrow


BD Pharmingen™
Rat (QC Testing), Human (Tested in Development)
Mouse IgG1, κ
Rat Nestin aa. 402-604 Recombinant Protein
Bioimaging (Routinely Tested)
5 µl
AB_1645181
Aqueous buffered solution containing BSA, protein stabilizer, and ≤0.09% sodium azide.
RUO


Preparation And Storage

The monoclonal antibody was purified from tissue culture supernatant or ascites by affinity chromatography. The antibody was conjugated to Alexa Fluor® 647 under optimum conditions, and unreacted Alexa Fluor® 647 was removed. Store undiluted at 4°C and protected from prolonged exposure to light. Do not freeze.

Recommended Assay Procedures

For more information, please refer to: http://www.bdbiosciences.com/pharmingen/protocols/Bioimaging_Certified.shtml or htpp://www.bdbiosciences.com/bioimaging/reagents.

Recommended Protocol for Bioimaging:

1.        Seed the cells in appropriate culture medium at an appropriate cell density in a BD Falcon™ 96-well Imaging Plate (Cat. No. 353219), and

        culture overnight to 48 hours.

2.        Remove the culture medium from the wells, and wash (one to two times) with 100 μl of 1× PBS.

3.        Fix the cells by adding 100 µl of fresh 3.7% Formaldehyde in PBS or BD Cytofix™ fixation buffer (Cat. No. 554655) to each well and incubating for 10 minutes at room temperature (RT).

4.        Remove the fixative from the wells, and wash the wells (one to two times) with 100 μl of 1× PBS.

5.        Permeabilize the cells using either cold methanol (a), Triton™ X-100 (b), or Saponin (c):

a.        Add 100 µl of -20°C 90% methanol or -20°C BD Phosflow™ Perm Buffer III (Cat. No. 558050) to each well and incubate for 5 minutes at RT.

b.        Add 100 µl of 0.1% Triton™ X-100 to each well and incubate for 5 minutes at RT.

c.        Add 100 µl of 1× Perm/Wash buffer (Cat. No. 554723) to each well and incubate for 15 to 30 minutes at RT.  Continue to use 1× Perm/Wash buffer for all subsequent wash and dilutions steps.

6.        Remove the permeabilization buffer from the wells, and wash one to two times with 100 μl of appropriate buffer (either 1× PBS or 1× Perm/Wash buffer, see step 5.c.).

7.        Optional blocking step:  Remove the wash buffers, and block the cells by adding 100 µl of blocking buffer BD Pharmingen™ Stain Buffer (FBS) (Cat. No. 554656) or 3% FBS in appropriate dilution buffer to each well and incubating for 15 to 30 minutes at RT.

8.        Dilute the antibody to its optimal working concentration in appropriate dilution buffer.  Titrate purified (unconjugated) antibodies and second-step reagents to determine the optimal concentration.  If using a Bioimaging Certified antibody conjugate, dilute it 1:10.

9.        Add 50 µl of diluted antibody per well and incubate for 60 minutes at RT.  Incubate in the dark if using fluorescently labeled antibodies.

10.        Remove the antibody, and wash the wells three times with 100 μl of wash buffer.  An optional detergent wash (100 μl of 0.05% Tween in 1× PBS) can be included prior to the regular wash steps.

11.   If the antibody being used is fluorescently labeled, then move to step 12.  Otherwise, if using a purified unlabeled antibody, repeat steps 8 to 10 with a fluorescently labeled second-step reagent to detect the purified antibody.

12.        After the final wash, counter-stain the nuclei by adding 100 μl of a 2 μg/ml solution of Hoechst 33342 (eg, Sigma-Aldrich Cat. No. B2261) in 1× PBS to each well at least 15 minutes before imaging.

13.        View and analyze the cells on an appropriate imaging instrument.  Recommended filters for the BD Pathway™ instruments are:

Instrument                        Excitation        Emission        Dichroic

BD Pathway 855                620/60                700/75                660 LP

BD Pathway 435                628/40                690/40                FF660

Product Notices

  1. Please refer to www.bdbiosciences.com/us/s/resources for technical protocols.
  2. This reagent has been pre-diluted for use at the recommended Volume per Test when following the Recommended Assay Procedure. A Test is typically ~10,000 cells cultured in a well of a 96-well imaging plate.
  3. The Alexa Fluor®, Pacific Blue™, and Cascade Blue® dye antibody conjugates in this product are sold under license from Molecular Probes, Inc. for research use only, excluding use in combination with microarrays, or as analyte specific reagents. The Alexa Fluor® dyes (except for Alexa Fluor® 430), Pacific Blue™ dye, and Cascade Blue® dye are covered by pending and issued patents.
  4. Alexa Fluor® is a registered trademark of Molecular Probes, Inc., Eugene, OR.
  5. Triton is a trademark of the Dow Chemical Company.
  6. Source of all serum proteins is from USDA inspected abattoirs located in the United States.
  7. Caution: Sodium azide yields highly toxic hydrazoic acid under acidic conditions. Dilute azide compounds in running water before discarding to avoid accumulation of potentially explosive deposits in plumbing.
560341 Rev. 3
Antibody Details
Down Arrow Up Arrow
25/NESTIN

The cytoskeleton consists primarily of core structural proteins that include microfilaments, microtubules, and intermediate filaments (IFs). IFs contain more than 50 distinct proteins that are organized into six different subtypes: Type I/II keratins expressed in epithelia, type III vimentin/desmin, type IV neurofilament proteins, type V nuclear lamins, and type VI nestin expressed primarily in embryonic cells. Nestin has a conserved core region (amino acids 7 to 314), which contains an α helical domain that is involved in coiled-coil assembly of IFs. The C-terminal region of nestin is similar to type IV IFs, since it contains highly charged amino acids, many glutamate residues, and an 11 amino acid repeat motif. Nestin is expressed in the cerebrum during embryonic development, in the cerebellum during early postnatal development, and in dermatomal cells and myoblasts during myogenesis. In vitro, nestin forms homodimers and homotetramers, but not IFs, and can co-assemble with type III vimentin and type IV internexin proteins. Thus, nestin is a core IF protein that is essential for proper cytoskeletal formation during neurogenesis and myogenesis.

560341 Rev. 3
Format Details
Down Arrow Up Arrow
Alexa Fluor™ 647
Alexa Fluor™ 647 Dye is part of the BD red family of dyes. This is a small organic fluorochrome with an excitation maximum (Ex Max) at 653-nm and an emission maximum (Em Max) at 669-nm. Alexa Fluor 647 is designed to be excited by the Red laser (627-640 nm) and detected using an optical filter centered near 520-nm (e.g., a 660/20 nm bandpass filter). Please ensure that your instrument’s configurations (lasers and optical filters) are appropriate for this dye.
Alexa Fluor™ 647
Red 627-640 nm
653 nm
669 nm
560341 Rev.3
Citations & References
Down Arrow Up Arrow
View product citations for antibody "560341" on CiteAb

Development References (5)

  1. Jin K, Zhu Y, Sun Y, Mao XO, Xie L, Greenberg DA. Vascular endothelial growth factor (VEGF) stimulates neurogenesis in vitro and in vivo. Proc Natl Acad Sci U S A. 2002; 99(18):11946-11950. (Clone-specific: Immunofluorescence). View Reference
  2. Kachinsky AM, Dominov JA, Miller JB. Myogenesis and the intermediate filament protein, nestin. Dev Biol. 1994; 165(1):216-228. (Biology). View Reference
  3. Kernie SG, Erwin TM, Parada LF. Brain remodeling due to neuronal and astrocytic proliferation after controlled cortical injury in mice. J Neurosci Res. 2001; 66(3):317-326. (Clone-specific: Immunofluorescence). View Reference
  4. Lendahl U, Zimmerman LB, McKay RD. CNS stem cells express a new class of intermediate filament protein. Cell. 1990; 60(4):585-595. (Biology). View Reference
  5. Steinert PM, Chou YH, Prahlad V, et al. A high molecular weight intermediate filament-associated protein in BHK-21 cells is nestin, a type VI intermediate filament protein. Limited co-assembly in vitro to form heteropolymers with type III vimentin and type IV alpha-internexin. J Biol Chem. 1999; 274(14):9881-9890. (Biology). View Reference
View All (5) View Less
560341 Rev. 3

Please refer to Support Documents for Quality Certificates


Global - Refer to manufacturer's instructions for use and related User Manuals and Technical data sheets before using this products as described


Comparisons, where applicable, are made against older BD Technology, manual methods or are general performance claims.  Comparisons are not made against non-BD technologies, unless otherwise noted.

For Research Use Only. Not for use in diagnostic or therapeutic procedures.