|
|
1.
|
|
Pulse actively growing cells in a tissue culture flask for one
hour with 10 µM BrdU (Cat. No. 550891).*
|
|
|
|
|
|
|
|
2.
|
|
Pour contents of tissue culture flask into a centrifuge tube. Centrifuge
10 minutes at 200 - 300 x g (all centrifugation steps are
performed at 200 - 300 x g, at RT). Aspirate supernatant.
Loosen pellet by tapping tube.
|
|
|
|
|
|
|
|
3.
|
|
While vortexing, add ice cold 70% ethanol to cells, dropwise, to a
final concentration of 1 x 106 cells/100 µl. Incubate
20 minutes at RT.
|
|
|
|
|
|
|
|
4.
|
|
Aliquot 100 µl into each test tube (12 mm
x 75 mm). Wash with 1 ml wash buffer. Centrifuge 5 minutes. Aspirate
supernatant. Loosen pellet.
|
|
|
|
|
|
|
|
5.
|
|
Resuspend pellet in denaturing solution.
Mix well. Incubate 20 minutes at RT. NOTE: Denaturing solution must
be made fresh.
|
|
|
|
|
|
|
|
6.
|
|
Add 1 ml wash buffer. Mix well. Centrifuge
5 minutes. Aspirate supernatant.
|
|
|
|
|
|
|
|
7.
|
|
Resuspend pellet in 0.5 ml 0.1 M sodium borate (Na2B4O7
), pH 8.5, to neutralize any residual acid. Incubate 2 minutes
at RT.
|
|
|
|
|
|
|
|
8.
|
|
Add 1 ml wash buffer. Mix well. Centrifuge
5 minutes. Aspirate supernatant.
|
|
|
|
|
|
|
|
9.
|
|
Add primary antibody: dilute anti-BrdU monoclonal antibody (Cat.
No. 555627) in dilution buffer, such that 50 µl contains the
optimal concentration. Resuspend cell pellet in 50 µl of the
diluted antibody. Incubate 20 minutes at RT.
|
|
|
|
|
|
|
|
10.
|
|
Add 1 ml wash buffer. Mix well. Centrifuge
5 minutes. Aspirate supernatant.
|
|
|
|
|
|
|
|
11.
|
|
Add secondary antibody: dilute FITC-conjugated goat anti-mouse
Ig (Cat. No. 554001) in dilution buffer, such that 50 µl contains
the optimal concentration. Resuspend cell pellet in 50 µl
of the diluted antibody. Incubate 20 minutes at RT. NOTE: Eliminate
this step when using direct BrdU conjugates; FITC anti-BrdU (Cat.
No. 556028), PE BrU (Cat. No. 556029)
|
|
|
|
|
|
|
|
12.
|
|
Add 1 ml wash buffer. Mix well. Centrifuge
5 minutes. Aspirate supernatant.
|
|
|
|
|
|
|
|
13.
|
|
Resuspend pellet in 0.5 ml propidium iodide (10 µg/ml in
PBS) or 20ul (0.25ug) of 7-AAD. Incubate 30 minutes at RT, protected
from light.
|
|
|
|
|
|
|
|
14.
|
|
Analyze the cells by flow cytometry
|
|
|
|
|
|
|
|
15.
|
|
Following analysis, flush flow cytometer for 10 minutes with 10%
bleach and 5 minutes with dH2O.
|
*Also see our Technical Data Sheet for Cat. No. 550891 for additional
BrdU labeling protocols.