Description
BD CellView™ Calibration Beads are designed for use on BD FACSDiscover™ flow cytometers with BD CellView™ Image Technology. The beads enable the software to automatically calibrate the imaging system. These beads are hard dyed fluorescent particles that are excited by the 488 imaging laser and emit fluorescence across the supported fluorescent detectors.
Preparation And Storage
Store vials at 2–8 °C and protect from light. Do not freeze. The beads are stable until the date shown on the vial label when stored as directed. Do not use after the expiration date. When protected from light, the beads are stable after dilution for 8 hours at 15–25 °C or 24 hours at 2–8 °C.
Development References (2)
-
Centers for Disease Control and Prevention. 2007 Guideline for Isolation Precautions: Preventing Transmission of Infectious Agents in Healthcare Settings. Available: https://www.cdc.gov/infectioncontrol/guidelines/isolation/index.html March 12, 2019. View Reference
-
Clinical and Laboratory Standards Institute. Protection of Laboratory Workers from Occupationally Acquired Infections. In: CLSI. CLSI, ed. CLSI document M29-A4. Wayne, PA: Clinical and Laboratory Standards Institute; 2014:1-133. View Reference
Please refer to Support Documents for Quality Certificates
Global - Refer to manufacturer's instructions for use and related User Manuals and Technical data sheets before using this products as described
Comparisons, where applicable, are made against older BD Technology, manual methods or are general performance claims. Comparisons are not made against non-BD technologies, unless otherwise noted.
For Research Use Only. Not for use in diagnostic or therapeutic procedures.