Skip to main content Skip to navigation
7-Color Setup Beads

BD FACS™ 7-Color Setup Beads

Product Details
Down Arrow Up Arrow


BD FACS™ 7-color setup beads are for in vitro diagnostic use on a BD FACSCanto™ flow cytometer with BD FACSCanto™ software. The beads are used to adjust detector voltages, to set fluorescence compensation, and to monitor daily instrument performance.

Preparation And Storage

• Store the contents of the kit at 2° to 8°C. Do not use after the expiration date shown on the label.

• After resuspension in BD FACS setup bead diluent, a bead tube from the BD FACS 7-color setup beads kit is stable for 8 hours at 2° to 8°C or for 1 hour at 20° to 25°C.

• Keep the resuspended bead tube protected from light. Store the tube on ice if not using immediately.

666289 Rev. 1

Please refer to Support Documents for Quality Certificates

Global - Refer to manufacturer's instructions for use and related User Manuals and Technical data sheets before using this products as described

Comparisons, where applicable, are made against older BD Technology, manual methods or are general performance claims.  Comparisons are not made against non-BD technologies, unless otherwise noted.

For In Vitro Diagnostic Use.



Documents are subject to revision without notice. Please verify you have the correct revision of the document, and always refer back to BD's eIFU website for the latest and most up to date information.