Skip to main content Skip to navigation
FC Beads 8-Color Kit for BD OneFlow™

BD™ FC Beads 8-Color Kit for BD OneFlow™

Product Details
Down Arrow Up Arrow


BD™ FC beads 8-color kit for BD OneFlow™ assays (BD FC beads) are intended to allow software to determine spillover values (SOVs) for fluorescence compensation. BD FC beads are designed for use with a suitably equipped BD™ flow cytometer and software designated for in vitro diagnostic use.

Preparation And Storage

• Store tubes at 2°C–8°C in the foil pouch. The tubes should not be frozen. Protect the tubes from exposure to light and humidity. The beads and diluent are stable until the expiration date shown on the pouch and bottle labels when stored as directed. Do not use after the expiration date. CAUTION Do not remove the desiccant pack from the pouch. Reseal the pouch immediately after removing a tube and return the pouch to 2°C–8°C storage as soon as possible. • After rehydration, when protected from light, the beads are stable for: – 1 hour at 25°C – 4 hours at 2°C–8°C

658621 Rev. 1

Please refer to Support Documents for Quality Certificates

Global - Refer to manufacturer's instructions for use and related User Manuals and Technical data sheets before using this products as described

Comparisons, where applicable, are made against older BD Technology, manual methods or are general performance claims.  Comparisons are not made against non-BD technologies, unless otherwise noted.

For In Vitro Diagnostic Use.



Documents are subject to revision without notice. Please verify you have the correct revision of the document, and always refer back to BD's eIFU website for the latest and most up to date information.