Skip to main content Skip to navigation
APC Beads
Product Details
Down Arrow Up Arrow


Description

BD Calibrite™ Beads are designed for use with BD FACSComp™ or AutoCOMP™ software and the BD family of flow cytometers. The beads are used to adjust instrument settings, set fluorescence compensation, and check instrument sensitivity. Daily use is recommended for monitoring instrument performance over time. BD Calibrite™ Beads are for research use only and are not for use in diagnostic or therapeutic procedures.



Preparation And Storage

• Store CaliBRITE beads at 2° to 8°C and protected from direct light. Do not use after the expiration date shown on the label.

• Store Bead Dilution Buffer at 2° to 8°C.

• After dilution, CaliBRITE bead suspensions prepared in Bead Dilution Buffer are stable for 8 hours at 2° to 8°C or for 1 hour at 20–25°C.

• After dilution, CaliBRITE bead suspensions prepared in FACSFlow™ sheath fluid are stable for 8 hours at 2° to 8°C or, if PerCP beads are included, for 1 hour at 2° to 8°C.

664912 Rev. 1

Please refer to Support Documents for Quality Certificates

Global - Refer to manufacturer's instructions for use and related User Manuals and Technical data sheets before using this products as described

Comparisons, where applicable, are made against older BD Technology, manual methods or are general performance claims.  Comparisons are not made against non-BD technologies, unless otherwise noted.

For Research Use Only. Not for use in diagnostic or therapeutic procedures. 

 

Although not required, these products are manufactured in accordance with Good Manufacturing Practices.