Preparation And Storage
Recommended Assay Procedures
BD® CompBeads can be used as surrogates to assess fluorescence spillover (compensation). When fluorochrome conjugated antibodies are bound to BD® CompBeads, they have spectral properties very similar to cells. However, for some fluorochromes there can be small differences in spectral emissions compared to cells, resulting in spillover values that differ when compared to biological controls. It is strongly recommended that when using a reagent for the first time, users compare the spillover on cells and BD® CompBeads to ensure that BD® CompBeads are appropriate for your specific cellular application.
Product Notices
- Please refer to www.bdbiosciences.com/us/s/resources for technical protocols.
- Please refer to http://regdocs.bd.com to access safety data sheets (SDS).
- For U.S. patents that may apply, see bd.com/patents.
- Caution: Sodium azide yields highly toxic hydrazoic acid under acidic conditions. Dilute azide compounds in running water before discarding to avoid accumulation of potentially explosive deposits in plumbing.
- Since applications vary, each investigator should titrate the reagent to obtain optimal results.
- Species cross-reactivity detected in product development may not have been confirmed on every format and/or application.
- The production process underwent stringent testing and validation to assure that it generates a high-quality conjugate with consistent performance and specific binding activity. However, verification testing has not been performed on all conjugate lots.
- When using high concentrations of antibody, background binding of this dye to erythroid fragments produced by ammonium chloride-based lysis, such as with BD Pharm Lyse™ Lysing Buffer (Cat. No. 555899), has been observed when the antibody conjugate was present during the lysis procedure. This may cause nonspecific staining of target cells, such as leukocytes, which have bound the resulting erythroid fragments. This background can be mitigated by any of the following: titrating the antibody conjugate to a lower concentration, fixing samples with formaldehyde, or removing erythrocytes before staining (eg, gradient centrifugation or pre-lysis with wash). This background has not been observed when cells were lysed with BD FACS™ Lysing Solution (Cat. No. 349202) after staining.
- For fluorochrome spectra and suitable instrument settings, please refer to our Multicolor Flow Cytometry web page at www.bdbiosciences.com/colors.
- An isotype control should be used at the same concentration as the antibody of interest.
- Please observe the following precautions: We recommend that special precautions be taken (such as wrapping vials, tubes, or racks in aluminum foil) to protect exposure of conjugated reagents, including cells stained with those reagents, to any room illumination. Absorption of visible light can significantly affect the emission spectra and quantum yield of tandem fluorochrome conjugates.
- Tandem fluorochromes contain both an energy donor and an energy acceptor. Although every effort is made to minimize the lot-to-lot variation in the efficiency of the fluorochrome energy transfer, differences in the residual emission from the donor may be observed. Additionally, multi-laser cytometers may directly excite both the donor and acceptor fluorochromes. Therefore, we recommend for every tandem conjugate, a matched individual single-stain control be acquired for generating a compensation or spectral unmixing matrix.
- Cy is a trademark of Global Life Sciences Solutions Germany GmbH or an affiliate doing business as Cytiva.
- Human donor specific background has been observed in relation to the presence of anti-polyethylene glycol (PEG) antibodies, developed as a result of certain vaccines containing PEG, including some COVID-19 vaccines. We recommend use of BD Horizon Brilliant™ Stain Buffer in your experiments to help mitigate potential background. For more information visit https://www.bdbiosciences.com/en-us/support/product-notices.
Companion Products
The 6C9 monoclonal antibody specifically recognizes human and mouse Complement component 3 (C3) and its multifunctional C3b and iC3b fragments. C3 is a ~190 kDa plasma glycoprotein that functions as a key component of the classical, alternative and lectin complement activation pathways. Active C3 fragments participate in innate and adaptive immune responses that eliminate pathogens, dying cells, and immune complexes from the body. C3 is produced by hepatocytes, mast cells, and leucocytes including some monocytes, macrophages, dendritic cells (DC), and T cells. As a result of complement activation, eg, initiated by an antigen-antibody immune complex in the classical pathway, biologically active C3b fragments can be cleaved from C3 by enzymatic C3 convertases. C3b can function as an opsonin by binding covalently via its reactive thioester to the surfaces of target cells, including microbes. C3b can also bind to antigen-antibody immune complexes. Macrophages and neutrophils can recognize and bind to C3b by their complement receptors, such as Complement Receptor 1 (CR1, CD35), which enhances their phagocytosis of C3b-bound target cells or immune complexes. Opsonization of target surfaces, including the cell surfaces of pathogenic organisms, infected or tumor cells, through C3b deposition is central to all three pathways of complement activation during innate or adaptive immune responses. C3b can also associate with other components of the complement system to form a C5 convertase. This complex cleaves C5 into the C5a anaphylatoxin and C5b which initiates formation of the of the cytolytic membrane attack complex (MAC) that can form holes in target cell membranes leading to cell lysis. C3b can be further cleaved into iC3b by factor I protease and its cofactors. The iC3b fragment serves as a ligand for engaging lymphoid and phagocytic cells via various receptors including CR2 (CD21), CR3 (CD11b/CD18), CR4 (CD11c/CD18), and CRIg.
Development References (5)
-
Colonna L, Parry GC, Panicker S, Elkon KB. Uncoupling complement C1s activation from C1q binding in apoptotic cell phagocytosis and immunosuppressive capacity.. Clin Immunol. 2016; 163:84-90. (Clone-specific: Flow cytometry). View Reference
-
Dufloo J, Guivel-Benhassine F, Buchrieser J, et al. Anti-HIV-1 antibodies trigger non-lytic complement deposition on infected cells.. EMBO Rep. 2020; 21(2):e49351. (Clone-specific: Flow cytometry). View Reference
-
Lubbers R, van Essen MF, van Kooten C, Trouw LA. Production of complement components by cells of the immune system.. Clin Exp Immunol. 2017; 188(2):183-194. (Biology). View Reference
-
Shi J, Rose EL, Singh A, et al. TNT003, an inhibitor of the serine protease C1s, prevents complement activation induced by cold agglutinins.. Blood. 2014; 123(26):4015-22. (Clone-specific: Flow cytometry). View Reference
-
Sun D, Zhang M, Liu G, et al. Real-Time Imaging of Interactions of Neutrophils with Cryptococcus neoformans Demonstrates a Crucial Role of Complement C5a-C5aR Signaling.. Infect Immun. 2016; 84(1):216-29. (Clone-specific: Flow cytometry). View Reference
Please refer to Support Documents for Quality Certificates
Global - Refer to manufacturer's instructions for use and related User Manuals and Technical data sheets before using this products as described
Comparisons, where applicable, are made against older BD Technology, manual methods or are general performance claims. Comparisons are not made against non-BD technologies, unless otherwise noted.
For Research Use Only. Not for use in diagnostic or therapeutic procedures.
Refer to manufacturer's instructions for use and related User Manuals and Technical Data Sheets before using this product as described.
Comparisons, where applicable, are made against older BD technology, manual methods or are general performance claims. Comparisons are not made against non-BD technologies, unless otherwise noted.