Skip to main content Skip to navigation
Alexa Fluor® 488 Mouse anti-Cytochrome c
Alexa Fluor® 488 Mouse anti-Cytochrome c
Immunofluorescent staining of human cell lines.  HeLa cells (ATCC CCL-2) were seeded in a 96-well imaging plate (Cat. No. 353219) at ~10,000 cells per well.  After overnight incubation, the cells were fixed, permeabilized with Triton™ X-100, stained with Alexa Fluor® 488 Mouse anti-Cytochrome c (pseudo colored green), and the nuclei were counterstained with Hoechst 33342 (pseudo colored blue) according to the Recommended Assay Procedure.  The images were captured on a BD Pathway™ 435 Cell Analyzer with a 20x objective and merged using BD Attovision™ software.  This antibody also stains A549 (ATCC CCL-185) and U-2 OS (ATCC HTB-96) cells using  Triton™ X-100, cold methanol, or Saponin for permeabilization (see Recommended Assay Procedure).
Immunofluorescent staining of human cell lines.  HeLa cells (ATCC CCL-2) were seeded in a 96-well imaging plate (Cat. No. 353219) at ~10,000 cells per well.  After overnight incubation, the cells were fixed, permeabilized with Triton™ X-100, stained with Alexa Fluor® 488 Mouse anti-Cytochrome c (pseudo colored green), and the nuclei were counterstained with Hoechst 33342 (pseudo colored blue) according to the Recommended Assay Procedure.  The images were captured on a BD Pathway™ 435 Cell Analyzer with a 20x objective and merged using BD Attovision™ software.  This antibody also stains A549 (ATCC CCL-185) and U-2 OS (ATCC HTB-96) cells using  Triton™ X-100, cold methanol, or Saponin for permeabilization (see Recommended Assay Procedure).
Product Details
Down Arrow Up Arrow


BD Pharmingen™
Human (QC Testing), Mouse, Rat (Reactivity Confirmed in Development)
Mouse BALB/c IgG1, κ
Rat Cytochrome c
Bioimaging (Routinely Tested)
5 µl
AB_1645346
Aqueous buffered solution containing BSA, protein stabilizer, and ≤0.09% sodium azide.
RUO


Preparation And Storage

The monoclonal antibody was purified from tissue culture supernatant or ascites by affinity chromatography. The antibody was conjugated to Alexa Fluor® 488 under optimum conditions, and unreacted Alexa Fluor® 488 was removed. Store undiluted at 4°C and protected from prolonged exposure to light. Do not freeze.

Recommended Assay Procedures

1.        Seed the cells in appropriate culture medium at an appropriate cell density in a BD Falcon™ 96-well Imaging Plate (Cat. No. 353219), and

        culture overnight to 48 hours.

2.        Remove the culture medium from the wells, and wash (one to two times) with 100 μl of 1× PBS.

3.        Fix the cells by adding 100 µl of fresh 3.7% Formaldehyde in PBS or BD Cytofix™ fixation buffer (Cat. No. 554655) to each well and incubating for 10 minutes at room temperature (RT).

4.        Remove the fixative from the wells, and wash the wells (one to two times) with 100 μl of 1× PBS.

5.        Permeabilize the cells using either cold methanol (a), Triton™ X-100 (b), or Saponin (c):

a.        Add 100 µl of -20°C 90% methanol or -20°C BD™ Phosflow Perm Buffer III (Cat. No. 558050) to each well and incubate for 5 minutes at RT.

b.        Add 100 µl of 0.1% Triton™ X-100 to each well and incubate for 5 minutes at RT.

c.        Add 100 µl of 1× Perm/Wash buffer (Cat. No. 554723) to each well and incubate for 15 to 30 minutes at RT.  Continue to use 1× Perm/Wash buffer for all subsequent wash and dilutions steps.

6.        Remove the permeabilization buffer from the wells, and wash one to two times with 100 μl of appropriate buffer (either 1× PBS or 1× Perm/Wash buffer, see step 5.c.).

7.        Optional blocking step:  Remove the wash buffers, and block the cells by adding 100 µl of blocking buffer BD Pharmingen™ Stain Buffer (FBS) (Cat. No. 554656) or 3% FBS in appropriate dilution buffer to each well and incubating for 15 to 30 minutes at RT.

8.        Dilute the antibody to its optimal working concentration in appropriate dilution buffer.  Titrate purified (unconjugated) antibodies and second-step reagents to determine the optimal concentration.  If using a Bioimaging Certified antibody conjugate, dilute it 1:10.

9.        Add 50 µl of diluted antibody per well and incubate for 60 minutes at RT.  Incubate in the dark if using fluorescently labeled antibodies.

10.        Remove the antibody, and wash the wells three times with 100 μl of wash buffer.  An optional detergent wash (100 μl of 0.05% Tween in 1× PBS) can be included prior to the regular wash steps.

11.   If the antibody being used is fluorescently labeled, then move to step 12.  Otherwise, if using a purified unlabeled antibody, repeat steps 8 to 10 with a fluorescently labeled second-step reagent to detect the purified antibody.

12.        After the final wash, counter-stain the nuclei by adding 100 μl of a 2 μg/ml solution of Hoechst 33342 (eg, Sigma-Aldrich Cat. No. B2261) in 1× PBS to each well at least 15 minutes before imaging.

13.        View and analyze the cells on an appropriate imaging instrument.  Recommended filters for the BD Pathway™ instruments are:

Instrument                        Excitation        Emission        Dichroic

BD Pathway 855                488/10                515 LP                Fura/FITC

BD Pathway 435                482/35                536/40                FF506

Product Notices

  1. Please refer to www.bdbiosciences.com/us/s/resources for technical protocols.
  2. This reagent has been pre-diluted for use at the recommended Volume per Test when following the Recommended Assay Procedure. A Test is typically ~10,000 cells cultured in a well of a 96-well imaging plate.
  3. The Alexa Fluor®, Pacific Blue™, and Cascade Blue® dye antibody conjugates in this product are sold under license from Molecular Probes, Inc. for research use only, excluding use in combination with microarrays, or as analyte specific reagents. The Alexa Fluor® dyes (except for Alexa Fluor® 430), Pacific Blue™ dye, and Cascade Blue® dye are covered by pending and issued patents.
  4. Caution: Sodium azide yields highly toxic hydrazoic acid under acidic conditions. Dilute azide compounds in running water before discarding to avoid accumulation of potentially explosive deposits in plumbing.
  5. Triton is a trademark of the Dow Chemical Company.
  6. Source of all serum proteins is from USDA inspected abattoirs located in the United States.
  7. Alexa Fluor® is a registered trademark of Molecular Probes, Inc., Eugene, OR.
560263 Rev. 1
Antibody Details
Down Arrow Up Arrow
6H2.B4

A cytochrome is an electron-transporting protein that contains a heme prosthetic group.  Cytochromes have been known to be essential components of the mitochondrial respiratory chain since 1925.  The iron atom of the heme group in cytochromes alternates between a reduced ferrous (+2) state and an oxidized ferric (+3) state during electron transport in oxidative phosphorylation.  Cytochromes are classified into four groups (a, b, c and d) according to spectrochemical characteristics, and there are five cytochromes between coenzyme QH2 and O2 in the electron transport chain.  Cytochrome c is a water-soluble protein that either promotes cell survival or death, depending upon its intracellular location.  In healthy cells, it is a peripheral membrane protein of the mitochondria that transports electrons from the coenzyme QH2 cytochrome c reductase complex to the cytochrome c oxidase complex.  When proapoptotic stimuli induce breakdown of the mitochondria, cytochrome c is released to the cytosol where it functions in the activation of caspases that trigger apoptosis.

The 6H2.B4 monoclonal antibody has been reported to recognize the native and not the denatured form of rat, mouse, and human cytochrome c.  Furthermore, studies utilizing competitive ELISA indicate that mAb 6H2.B4 binds to a region around residue 62 of rat cytochrome c.  

560263 Rev. 1
Format Details
Down Arrow Up Arrow
Alexa Fluor™ 488
Alexa Fluor™ 488 Dye is part of the BD blue family of dyes. This is a small organic fluorochrome with an excitation maximum (Ex Max) at 494-nm and an emission maximum (Em Max) at 517-nm. Alexa Fluor™ 488 is designed to be excited by the Blue laser (488 nm) and detected using an optical filter centered near 520-nm (e.g., a 530/30-nm bandpass filter). Please ensure that your instrument’s configurations (lasers and optical filters) are appropriate for this dye.
Alexa Fluor™ 488
Blue 488 nm
494 nm
517 nm
560263 Rev.1
Citations & References
Down Arrow Up Arrow

Development References (6)

  1. Arnoult D, Grodet A, Lee Y-J, Estaquier J, Blackstone C. Release of OPA1 during apoptosis participates in the rapid and complete release of cytochrome c and subsequent mitochondrial fragmentation. J Biol Chem. 2005; 280(42):35742-35750. (Clone-specific: Immunofluorescence).
  2. Garrido C, Galluzzi L, Brunet M, Puig PE, Didelot C, Kroemer G. Mechanisms of cytochrome c release from mitochondria. Cell Death Differ. 2006; 13:1423-1433. (Biology).
  3. Goshorn SC, Retzel E, Jemmerson R. Common structural features among monoclonal antibodies binding the same antigenic region of cytochrome c. J Biol Chem. 1991; 266(4):2134-2142. (Immunogen). View Reference
  4. Jemmerson R, Johnson JG. different functional boundaries for the major antigenic region of two cytochromes c. Proc Natl Acad Sci U S A. 1991; 88:4428-4432. (Immunogen).
  5. Liu X, Kim CN, Yang J, Jemmerson R, Wang X. Induction of apoptotic program in cell-free extracts: requirement for dATP and cytochrome c. Cell. 1996; 86(1):147-157. (Clone-specific). View Reference
  6. Rossé T, Olivier R, Monney L, et al. Bcl-2 prolongs cell survival after Bax-induced release of cytochrome c. Nature. 1998; 391(6666):496-499. (Clone-specific: Immunofluorescence). View Reference
View All (6) View Less
560263 Rev. 1

Please refer to Support Documents for Quality Certificates


Global - Refer to manufacturer's instructions for use and related User Manuals and Technical data sheets before using this products as described


Comparisons, where applicable, are made against older BD Technology, manual methods or are general performance claims.  Comparisons are not made against non-BD technologies, unless otherwise noted.

For Research Use Only. Not for use in diagnostic or therapeutic procedures.