Brilliant Stain Buffer
- Brand BD Horizon™
- Storage Buffer Aqueous buffered solution containing BSA and ≤0.09% sodium azide.
- Regulatory Status RUO
Regulatory Status Legend
Description
The BD Horizon™ Brilliant Stain Buffer is a buffer for the immunofluorescent staining of cells. Brilliant Stain Buffer is a solution that is added to mixtures of certain fluorescent reagents before staining cells. It was designed to complement multicolor flow cytometry experiments that utilize two or more different staining reagents conjugated with BD Horizon Brilliant fluorescent polymer dyes. Fluorescent dye interactions may cause staining artifacts which may affect data interpretation. For optimal and reproducible results, BD Horizon Brilliant Stain Buffer should be used anytime two or more BD Horizon Brilliant dyes are used in the same experiment. When using only one BD Horizon Brilliant reagent in an experiment, the Brilliant Stain Buffer is not needed. The BD Horizon Brilliant Stain Buffer is compatible with the use of other fluorescent staining reagents conjugated with traditional fluorochromes, such as fluorescein, phycoerythrin or Alexa Fluor® dyes.
Suggested Companion Products
Brilliant Stain Buffer RUO
100 Tests
Cat No: 563794
Stain Buffer (FBS) RUO
500 mL
Cat No: 554656
Brilliant Stain Buffer Plus RUO
1000 Tests
Cat No: 566385
Lysing Buffer RUO
100 mL
Cat No: 555899
Stain Buffer (BSA) RUO
500 mL
Cat No: 554657
Lysing Solution 10X Concentrate IVD
100
Cat No: 349202
Resources & Tools | ||||||
---|---|---|---|---|---|---|
Spectrum Viewer | Download MSDS |
Preparation and Storage
Store undiluted at 4°C and protected from prolonged exposure to light. Do not freeze.
Product Notices
- Source of all serum proteins is from USDA inspected abattoirs located in the United States.
- Caution: Sodium azide yields highly toxic hydrazoic acid under acidic conditions. Dilute azide compounds in running water before discarding to avoid accumulation of potentially explosive deposits in plumbing.
- Alexa Fluor® is a registered trademark of Life Technologies Corporation.
- Please refer to http://regdocs.bd.com to access safety data sheets (SDS).
- BD Horizon Brilliant Stain Buffer is covered by one or more of the following US patents: 8,110,673; 8,158,444; 8,575,303; 8,354,239.
Protocols for Multicolor Immunofluorescent Staining of Cells Using BD Horizon Brilliant Stain Buffer
Multicolor Staining of Human Cell Samples in Tubes or 96-Well Plates Using Individual Staining Reagents
1. Add 50 μL of BD Horizon Brilliant Stain Buffer to all tubes or desired wells for the experiment
Note: The 50 ìL amount of Brilliant Stain Buffer per tube or per well does not depend on the final staining volume or amount of cells used per tube or number of BD fluorescent antibodies used in staining. Although written for use with human cells, these protocols can readily be adapted for analyzing mouse cells or cells from other species, for example, by staining mouse cells at 4°C rather than at room temperature (RT).
2. Add each fluorescent reagent at the recommended volume per test (eg, 5 μL or 20 μL) and then proceed to either Protocol 1, 2, or 3.
Protocol 1 for Staining Whole Blood Samples in Tubes
a. Add 100 μL of human whole blood to each tube
b. Vortex tube contents
c. Incubate (30 min) the suspended cells protected from light at room temperature (RT)
d. Add 2 mL of BD FACS™ Lysing Solution (Cat. No. 349202; 10 min) or BD Pharm Lyse™ Lysing Buffer (Cat. No. 555899; 15 min) per tube and incubate protected from light at RT
e. Pellet cells by centrifugation (5 min) at 1400-1500 rpm
f. Aspirate supernatant; add 2-3 mL of stain/wash buffer, eg, BD Pharmingen™ Stain Buffer (FBS) (Cat. No. 554656)
or BD Pharmingen™ Stain Buffer (BSA) (Cat. No. 554657)
g. Pellet cells by centrifugation (5 min) at 1400-1500 rpm
h. Aspirate the supernatant and resuspend cells in 500 ìL of stain/wash buffer for flow cytometric analysis
Protocol 2 for Staining Peripheral Blood Mononuclear Cells or Bulk Erythrocyte-lysed Whole Blood Samples in Tubes
a. Add 100 μL of human cells to each tube
b. Vortex tube contents
c. Incubate (30 min) the suspended cells protected from light at room temperature (RT)
d. Add 2 ml of stain/wash buffer per tube
e. Pellet cells by centrifugation (5 min) at 1400-1500 rpm
f. Aspirate supernatant; add 2-3 mL of stain/wash buffer
g. Pellet cells by centrifugation (5 min) at 1400-1500 rpm
h. Aspirate the supernatant and resuspend cells in 500 μL of stain/wash buffer for flow cytometric analysis
Protocol 3 for Staining Peripheral Blood Mononuclear Cells or Bulk Erythrocyte-lysed Whole Blood Samples in 96-well Plates
Note: When planning for staining in plates, the user must take into account the volume of the BD Horizon Brilliant Stain Buffer used. Although written for use with human cells, this 96-well plate-based protocol can readily be adapted for analyzing mouse cells or cells from other species.
a. Add 50 μL of human cells to each well
b. Incubate (30 min) protected from light at RT
c. Wash by adding 100 μL of stain/wash buffer
d. Pellet cells by centrifugation (5 min) at 1400-1500 rpm
e. Aspirate supernatants
f. Resuspend pelleted cells by adding 250 μL of stain/wash buffer
g. Pellet cells by centrifugation (5 min) at 1400-1500 rpm
h. Aspirate supernatants
i. Resuspend pelleted cells thoroughly with 150 ìL stain/wash buffer by pipetting the suspended cells several times
j. Transfer well contents to tubes and add additional stain/wash buffer to the tubes as desired for flow cytometric analysis
Note: Alternatively, acquire samples for flow cytometric analysis from the plate directly
Multicolor Staining of Human Cell Samples in Tubes or 96-Well Plates Using Cocktailed Staining Reagents
Instead of adding staining reagents individually to each tube or well of a 96-well plate, it may be desirable to add cocktailed staining reagents, ie, mixtures of two or more fluorescent staining reagents. The following protocol provides an example of how to prepare a "per test" 5-Color Fluorescent Antibody Cocktail that already contains BD Horizon Brilliant Stain Buffer.
Human Samples: Pre-mixed Fluorescent Reagent Cocktails
For each multicolor test of cocktailed fluorescent reagents:
i) Add 50 μL of BD Horizon Brilliant Stain Buffer per test
ii) Add each fluorescent reagent at the recommended volume per test (5 μL or 20 μL)
iii) Mix reagents (especially after adding BD Horizon Brilliant reagents)
iv) Store cocktail at 4°C protected from light if it is to be used later
Note:Protected from light, fluorescent reagent cocktails containing more than one Brilliant Violet and/or Brilliant Blue reagent are best used within 24 hours after preparation when stored at 4ºC or within 4 hours when stored at room temperature. However, when more than one Brilliant Ultraviolet (BUV) reagent is in the cocktail, it is best used within 2 hours after preparation irrespective of storage temperature.
Example of creating a 5-Color Fluorescent Antibody Cocktail containing 2 different Brilliant Violet™ Conjugates
Final Volume per Test = 90 μL
_____________________________________________________________________________________
Total Number of Tests
Volume/Test (μL) 1 3 5 10
Brilliant Stain Buffer 50 50 150 250 500
Reagent 1 (BV) 5 5 15 25 50
Reagent 2 (BV) 5 5 15 25 50
Reagent 3 5 5 15 25 50
Reagent 4 5 5 15 25 50
Reagent 5 20 20 60 100 200
Total Volume 90 90 270 450 900
_____________________________________________________________________________________
Add desired volume of Reagent Cocktail (90 μL in this 5-color example) to all tubes or wells using
the protocols for staining human cells described above.
Compensation and Setup
BD Horizon Brilliant Stain Buffer can be used in single color compensation controls using cells. The buffer is compatible with BD™ Compbeads, however, it has not been tested with compensation beads from other vendors.